2024 My litter robot is not cycling

To troubleshoot the blue blinking, let's start by power cycling your unit: 1.) Leave your unit powered ON with the blue blinking light engaged & Unplug your power supply from the base. 2.) Wait 10 seconds then plug the unit back in. 3.) Allow the unit to complete a start‐up cycle.. Live pd tonight

Cycle doesn't start because cat not detected; Turns blue without cycling when powering up, Circuit board defective; Press down on bonnet (rear) Activate cat …Here's what I told Litter Robot, " Every time it’s used, it half cycles and I have to power it off and power it back on for it to cycle. Pushing the “cycle” ...Fetch's CEO discusses how robots will change the workplace. Fetch's CEO discusses how robots will change the workplace.Because it eliminates almost all odour, reduces litter tracking, has an 8-hour sleep setting when it will not cycle (Litter-Robot 3 only), and has an optional cabinet, you can place your Litter-Robot in any room in your home. Litter-Robot 3 Dimensions: Height: 74.9cm Width: 61.6cm Depth: 68.6cm Entryway: 40.64cm H x 26.03cm W Inside Globe: 38 ...It could very well be a bonnet issue. If the bonnet has been removed and not placed back on the unit properly, the yellow light will flash once per second. However, when the yellow light is flashing twice per second, it means the cycle was interrupted by the anti-pinch feature. If the anti-pinch safety feature is activated while cycling, the ...If you have a Litter-Robot III Open Air 3 and it's stopped working with yellow blinking / flashing light and/or the globe does not rotate in normal operatin...At one point during the first week with the Litter-Robot 4, Ernie entered the litter box mid-cleaning cycle and started peeing. Fortunately, the globe sensed this and stopped rotating.End result: WireShark shows zero network activity for any devices connecting to my 2.4GHz network. UPDATE 2: I uninstalled the app. Reset the LR3C. Followed the steps in the app to re-add it to my WiFi network and the App. It now …I noticed the left side of the litter robot seems to be pressing in a bit. So I took it apart cleaned it and put it all back together. Now all it will do is flash the blue light! The drawer is empty, the bag is not in the way, and it will not cycle at all, even when unplugged and plugged back in. Troubleshooting said to wipe the sensor with a ...Phone and Chat support available Mon-Fri: 9AM-7PM EST and Sat: 9AM-5PM EST, or submit a ticket anytime. Chat with us 1-877-250-7729 Submit a ticket. Discover troubleshooting tips for your Litter-Robot 4 in solid blue ready mode. Browse our support guide to ensure optimal use.Curious Cat. Photograph: Whisker. Whisker's Litter-Robot 4 is the company's fourth iteration of its famous box ( we also liked the 3 Connect ). This one comes with a much larger entry and ...Do not overtighten. Reassemble the globe, bonnet, and waste drawer. Plug the unit in, turn it on, and let the initial clean cycle finish. The globe should return to the Home position with the blue ready light on. If your unit does not cycle or does not cycle properly, review your installation. Purchase Litter-Robot 3 Pinch Contact & DFI Kit.My litter robot will not cycle. I've tried unplugging and plugging back in, as well as turning the power switch off and on and the yellow cycle light just comes on and stays on. The motor makes a quick sound like it is starting to cycle and then stops quickly - almost like a short circuit sound. Help!I have a litter robot 3 bought last year. It is now getting stuck in a cycle and is unusable. Symptoms are: A rotation cycle starts and dumps waste Then just before reversing direction the robot stops, the yellow light starts flashing and the globe moves a small amount further in the orginal rotation direction and stops A power off and restart can get the globe to rotate further (doing a full ...For those who have been enjoying the Litter-Robot automatic self cleaning litter box for a few months or a few years, you know that this is a great product that has very few issues. But, it is a robot with sensors etc. that can fail with usage. ... Put everything back together and let the unit cycle. In many cases, most problems should have ...Hey all! I've had my Litter Robot 3 for over 5 years now, and have had some issues with it over the last couple of years. Litter robot did send me some new wiring which my husband installed, and while that mostly fixed the issue (the cycle button was flashing yellow constantly and as a result it never cycled) it now seems to have the same issue cropping up again. After posts saying the Litter Robot 4 wasn't safe, with the pinch detectors failing, I investigated and found the circumstances where it could happen. This video shows you when it can happen, the actual risks and what Whisker are doing about it. Children learn through play. With a few simple household items and a little bit of help, children can learn the basics of engineering, physics and math while having fun along the w...Constant cat sensor interrupt, and then a day of no cycling. I've had my LR3 for over a year now, and the last few days there has been a constant Cat Sensor Interrupt even though no cat is inside. Resetting hasn't worked. It's not too heavy, it's on flat surface, it's not pushed against wall. Sometimes it will cycle as normal.Use a downward motion that pushes away from your body] Attempt to manually cycle the unit by pressing the “cycle” button. If the unit cycles properly, move to the next step. Reset the CATS by turning the unit off then on using the power button. During the start-up cycle, push on the unit to see if the CATS activates.Yes. Litter-Robot 4 uses laser and weight sensor technology to detect when your cat enters and exits the globe, which triggers the countdown timer and cleaning cycle. The SmartScale™ will not recognize kittens that weigh less than 3 lbs. Therefore, kittens that weigh less than 3 lbs can use Litter-Robot 4, but not in automatic mode.Litter robot 4 not wanting to complete cycle. Worked on my litter robot 4 the other day cause it was doing a thing where the colors 3 yellow 2 red would flash in the middle of a cycle. It would try again to cycle about 3 times then would stay stuck in that position. I looked up what those colors meant and it was giving a overload/jammed issue.In this comprehensive article, we will explore the various angles of this topic to understand why the Litter Robot may not cycle automatically and provide potential solutions. Common Issues with Litter Robot. Sensor Malfunction. One of the primary reasons why the Litter Robot may not cycle automatically is a malfunctioning sensor.3. After the litter is emptied, the globe pauses with the yellow light bar on and awaits your action. You may need to sweep any remaining litter toward the waste port. 4. Press the Cycle or Reset button to return the globe to the Home position. IMPORTANT: Supervise and prevent your cat from entering during the Empty Cycle.Maltipoo puppies are an adorable and popular choice for many dog lovers. With their cute appearance and friendly temperament, it’s no wonder why so many people are interested in br...Why does my Litter-Robot stop mid-cycle? If your Litter-Robot 3 stops mid-cycle, check out this helpful troubleshooting video to help remedy the problem. We’...Litter-Robot by using some catnip or a favorite treat. 2. Add a scoop of litter from the old litter box to provide a familiar scent for your cat. 3. Place treats on the step or handle around the Litter-Robot so your cat associates rewards with the unit. 4. Once you notice that your cats have used the Litter-Robot, power the unit on to cycle the ... Put the globe in with the key on an angle to fit into the notch to the left. Put bonnet back on. Then turn the key to the locked position. Replug in and it should cycle automatically. Hope this helps! Solid yellow light also could mean its in sleep cycle. If you hold the cycle button it should shut off. Details. Get started off on the right paw with the Litter-Robot 4 Starter Bundle! You'll receive a Litter-Robot 4—the newest, quietest, and smartest automatic litter box yet—plus Whisker accessories, premium odor-control and cleanliness products, all-natural litter, and a comprehensive 3-year warranty. Litter-Robot 4 (step, fence, and ...After about a year of ownership, the Litter-Robot often doesn’t cycle anymore. I’ve tried resetting and updating but with yet no results. Anyone got any other solutions? 11. 25 …App not communicating with LR3. Litter-Robot 3 Connect. Cleaned out & reset our Litter Robot 3 Connect as usual yesterday, noticed on the app today that there were no status updates (cycles and sensor timing, etc) since yesterday. Tried to force a manual cycle but no change. I checked the robot and the litter layer looked even.When the cat enters, the Cat Sensor detects increased weight, and knows not to perform a Clean cycle. W hen the cat exits, the Cat Sensor detects a decrease in weight (an almost complete return to its baseline), and allows the countdown to a Clean cycle to begin. Eventually (3, 7, or 15 minutes later—whatever you have your unit set to), a ...My teenage aged black cat does everything that's been mentioned! I've had these robots for years! 1st ones lasted 10 years and now we have 4 Litter Robot 4s. I wouldn't care that he helps the litter back into the globe after being sifted, but I fear he got his front leg injured! He suddenly began limping badly. Vet said it was a strain.Ok so on the side of the bonnet there are 2 tabs make sure they are clicked in. Maybe try taking it off and then placing it back on. You should be able to press the in with your fingers. Shouldn’t need any tools. I have never heard of a “keyhole plug”.Litter-Robot 4. My cat is 9 months old and is still in her playful stage. She took to the LR4 immediately, which I'm grateful for. The only problem now is that she plays in it 24/7. She will do her business, exit as she should, and then as soon as she hears the clean cycle, she runs and jumps in. Then the cycle stops, and as soon as she hears ...Litter box fullness: If the waste drawer is full, the Litter-Robot will not cycle on its own. Empty the waste drawer and reset the device to see if this resolves the issue. Incorrect settings: Ensure that the Litter-Robot settings are configured correctly for your cat's weight and litter type. If the settings are incorrect, the device may not ...Here’s where your hands-on experience matters. Start by unplugging the Litter-Robot and carefully inspecting the globe for any visible obstructions. Gently remove any clumps or debris causing the jam. Once cleared, plug the unit back in and initiate a cleaning cycle to ensure smooth rotation.Preparation. If Litter-Robot 4 displays a blue light bar with a blinking blue light adjacent to the Connect button, this indicates that the unit is connecting to the app or has disconnected and is trying to reconnect but has not successfully reconnected.. To reconnect your unit, you can re-enable the connection by pressing the Connect button once to turn the WiFi off, indicated by a white ...The Litter Robot 3 is an incredibly popular automatic cat litter box which automatically detects when a cat has entered and exited, and rotates the main globe to sift and dump the used litter. ... Cat sensor not working / Robot not cycling Symptom(s): Robot doesn't cycle, but can be cycled manually Resolved by: Thread(s): Litter robot emptys ins;Your Litter-Robot 4 cat sensor has been activated. This means that your cat has recently entered the globe, and the wait time countdown to the clean cycle has been initiated. No action is needed. If the solid red light does not resolve itself after a clean cycle, watch this video or try these tips: Placement:The primary goal of a self-cleaning litter box like the. Litter Robot 4. is to eliminate the hassle of scooping and daily maintenance, and boy oh boy does it succeed. There are only two issues I ...Introducing your cat to Litter-Robot. Most likely, your cat will quickly adapt to Litter-Robot. When using in automatic mode, be sure your cat or kitten weighs at least 3 lbs—the weight scale will not recognize cats weighing less than 3 lbs. ... Press and release the Empty button to start an empty cycle (empties all litter into the waste ...To troubleshoot the blue blinking, let's start by power cycling your unit: 1.) Leave your unit powered ON with the blue blinking light engaged & Unplug your power supply from the base. 2.) Wait 10 seconds then plug the unit back in. 3.) Allow the unit to complete a start‐up cycle.The Litter-Robot 3 is equipped with a cat sensor that detects when a cat enters and exits the globe. To ensure the accuracy and reliability of the cat sensor, press the Reset button after making any changes that will affect the weight of the unit, including emptying the waste drawer, adding or removing litter from the globe, or cleaning or moving the unit.I found I had to do the following to fix this situation. • make sure there was enough litter • press the reset button after every litter fill (even if I’m just topping it off a little bit) & everytime I put a fresh bag in the drawer • if these steps didn’t fix the issue then doing a hard reset worked but usually just pressing the reset button worked and it didn’t have the …Whisker App Onboarding: Hard Reset. Press the Power button to turn the unit off. Unplug Litter-Robot from the rear of the base. Leave the unit off for 1 minute. Plug it back in. Press the Power button. Allow the unit to complete the initial Clean cycle. Try the onboarding process again.Litter-Robot 3: Blue light flashing (Drawer full) Litter-Robot 3 is equipped with infrared emitters and sensors, called DFI sensors, located above the waste drawer that check if the drawer is full each time the globe returns to the Home position. Once a full waste drawer is detected, the unit will indicate it is full with a blue flashing light.Litter-Robot 3 Connect. CA $799. Buy in monthly payments with Affirm on orders over $50. Learn more. Never scoop again and experience a new level of cleanliness with Litter-Robot 3 Connect, the top-rated self-cleaning litter box for cats. Since 2000, over 1 million happy pet parents have upgraded to Litter-Robot.I paid eur750 in total as I paid for extended warranty too. But I do not expect that after a week I already have half my litter robot 3 replaced. I paid and bought a new litter robot 3. I understand that there could be a problem with a robot, but I don't want to replace half the robot if you state it's broken. I hope you understand my concern.If your cats are not using the Litter-Robot within a few days, continue using the old brand of litter in the old litter box, and let it go as long as possible without ... Toll Free: 877-250-7729 www.Litter-Robot.com Clean Cycle After your cat leaves the Globe, the Litter-Robot automatically performs a Clean cycle. The patented siftingStep 3: Check the Power Cord. If the waste drawer is not full and the sensors are clean, the next step is to check the power cord. A frayed or damaged power cord can cause the Litter Robot to malfunction and the yellow light to flash rapidly. Make sure the power cord is securely plugged into the unit and the outlet, and check for any …litter-robot-3. robotuser95 July 30, 2020, 3:37pm 1. Hello - when cycling, my litter robot makes a very loud popping noise and the globe pops up a bit as well. This has been an issue since I opened the box. I have not used the robot with litter yet so it is not a cleanliness issue.Yes. Litter-Robot 4 uses laser and weight sensor technology to detect when your cat enters and exits the globe, which triggers the countdown timer and cleaning cycle. The SmartScale™ will not recognize kittens that weigh less than 3 lbs. Therefore, kittens that weigh less than 3 lbs can use Litter-Robot 4, but not in automatic mode.Robot started cycling while cat was using it. Litter-Robot 4. You can see the yellow lights start to scroll at the end as the robot starts to cycle. Video then cuts off because I jumped up to turn the robot off. Thank goodness I was there!My litter robot will not cycle. I've tried unplugging and plugging back in, as well as turning the power switch off and on and the yellow cycle light just comes on and stays on. The motor makes a quick sound like it is starting to cycle and then stops quickly - almost like a short circuit sound. Help!Press the Cycle button to resume the cycle. Press the Reset button to abort the cycle and return the globe to the Home position. 3. After the litter is emptied, the globe pauses with the yellow light bar on and awaits your action. You may need to sweep any remaining litter toward the waste port. 4.1. Clean It Regularly. 2. Check Your Whisker App. 3. Use Good Quality Clumping Cat Litter. What Is Causing Litter-Robot to Get Stuck? Getting stuck or …Litter-Robot 3 Connect. CA $799. Buy in monthly payments with Affirm on orders over $50. Learn more. Never scoop again and experience a new level of cleanliness with Litter-Robot 3 Connect, the top-rated self-cleaning litter box for cats. Since 2000, over 1 million happy pet parents have upgraded to Litter-Robot.Troubleshooting steps already taken: unplugging it and plugging it in again. cleaning the unit. slightly opening the pin in the power jack. making sure that it is plugged directly into the wall using its original power adaptor. making sure that the unit is on level ground and not touching anything else.Cleaning your Litter-Robot. It's important to deep clean your Litter-Robot every 3-6 months. Over time, small clumps can accumulate within the internal pocket of the globe which can contribute to weight-related errors. Cleaning or soaking the globe thoroughly every 3-6 months will help prevent any excess weight from accumulating within the globe.The Litter-Robot 3 Connect comes with a 90-day in-home trial as well as a one-year warranty. You can extend the warranty to three years for an additional $100. Whisker offers an assortment of accessories for the Litter-Robot, such as litter mats, extra waste drawer liners, clumping clay cat litter, and an OdorTrap Pod.My litter robot is emptying clean litter into the bin. I fill slightly below the fill line, reset it, and the next time to machine cycles it dumps a ridiculous amount of litter out. So instead of the litter chamber being "filled", it is half empty. Litter-Robot 4. 1.In today’s fast-paced world, keeping our homes clean can be a challenge. That’s where robot vacuums and mops come in handy. These innovative devices can save you time and effort by...Step 10: Manual Cat Sensor Activation. Press on the Globe just above the entrance in a forward and downward direction—just press and release. The blue light should turn off and the red light should come on. You've activated the Cat Sensor to simulate your cat entering the Globe, then exiting. Allow the Wait Time (3, 7, or 15 minutes ...Get started by following the steps below. If possible, place Litter-Robot in the same location as the old litter box (at least during transition). Make sure the unit is on a firm, level surface in a cool, dry location. Locate the unit near a power outlet. Ensure the unit isn't pushed against a wall or into a corner (must not be touching any ...For a week. Did the full cleaning as before, but didn't fix it this time. It will only go so far then gives me the red bar. I have deleted it from the app (in the hopes of just running it manually) but I can't even make the robot itself reset back to factory to see if its just a firmware issues like some have suggested.Step 3: Check the Power Cord. If the waste drawer is not full and the sensors are clean, the next step is to check the power cord. A frayed or damaged power cord can cause the Litter Robot to malfunction and the yellow light to flash rapidly. Make sure the power cord is securely plugged into the unit and the outlet, and check for any …The globe begins rotating counterclockwise with the solid yellow light on. After several seconds, press the 'Reset' button to pause the cycle. [/font] [font=system-ui, -apple-system, BlinkMacSystemFont, Segoe UI, Roboto, Oxygen-Sans, Ubuntu, Cantarell, Helvetica Neue, Arial, sans-serif] 7. While the cycle is paused, press 'Reset' again ...Jun 6, 2020 ... ... my two Litter Robot units in 2 years of ownership. If you would like to read my full review of the Litter Robot III Open Air you can read it ...If your unit has a flashing red light bar or the unit will not cycle, this indicates that the cat sensor has been triggered for more than 30 minutes. You will also receive a notification on your phone if you use the Whisker app. Successful: If your unit returned home and displays a blue light bar, you've been successful.Re-connecting Litter-Robot 3. Perform a hard reset on your Litter-Robot. Unplug the unit from the back of the base. Wait 1 minute. Plug it back in and allow it to cycle. If the unit is still Offline in the app, proceed to the next step. Ensure you are using the latest version of the Whisker app.Make sure the waste drawer liner (bag) is fully inserted in the waste drawer. If it's up too high, it can block the DFI lens, making the Litter-Robot think it's full. Then press the Reset button. If that does not resolve it, please contact our team at [email protected]. 2.Now, the "ready" light flashes blue and when I press the reset button, the "cycling" light flashes yellow/amber rapidly. I Googled this and seems to be an indicator that the weight or anti-pinch sensors are being tripped (based on the flashing yellow/amber "cycling" light). I unplugged the robot and disassembled and used a q-tip to ...It certainly sounds like the Litter Robot manufacturer is acting responsibly. I have a fundamental issue, personally, with technology for its own sake. The idea of updating firmware in a cat box (not my problem), refrigerator (not my problem), or my car (this is a problem) makes my head spin. What is the value proposition?If you’re in the market for a new robotic vacuum, look no further than iRobot Roomba. With its advanced technology and efficient cleaning capabilities, the Roomba has become a hous...I did :( it's just below the line. It finally ran a full cycle, randomly. Worried it won't run again after a cat uses it because of how it's acting. I put the other litter box out just in case it stops again. I've also checked the balance because we have it on a run, making sure the base is actually on the floor and not against the wall.Extend your peace of mind with Litter-Robot 3 Connect—the highest-rated WiFi-enabled, self-cleaning litter box for cats—plus our hassle-free 3-year protection plan that covers Litter-Robot from top to bottom, with no deductibles or hidden fees. Never scoop again®. Helps reduce litter box odors. 90-day in-home trial. WhiskerCare™ Extended ...The difference between the Litter-Robot 3 and the Litter-Robot 3 Connect. The difference between the Litter-Robot 3 and the Litter-Robot 3 Connect is that the Litter-Robot 3 Connect has WiFi capabilities, while the Litter-Robot 3 does not. With the Litter-Robot 3 Connect, you'll have access to the app, which will give you even more freedom ...Preparation. Litter-Robot 4 is equipped with OmniSense™ detection that utilizes laser and weight sensor technology to provide real-time litter and waste drawer levels. OmniSense™ also supports the SafeCat system which continuously analyzes four safety zones to ensure your cat is always safe. There are three curtain sensors located in the ...Power. Press and release the Power button to turn the robot ON of OFF. The robot will begin a clean cycle when power is turned on. Press and hold, while at the home position, to enter night light setting mode. Cycle. Press and release the Cycle button to start a clean cycle. If already cycling, press Cycle to pause; press again to resume a cycle.

In the Whisker app, select your Litter-Robot 4 unit from the dashboard. Tap on Controls in the bottom right corner. Scroll to the bottom of the page and tap the Robot Information panel. On the Robot Information page, select Update Firmware to begin the update process.This will take between 5 and 27 minutes to complete.. Aydan albuquerque reviews

If your Litter-Robot 3 is displaying a solid yellow light with no movement of the globe, there are several things we need to check. First, press the Cycle button to ensure the unit is not paused. The Empty cycle allows you to empty all of the litter from the globe into the waste drawer for easy disposal. After the litter is emptied, the globe ...The Litter-Robot is equipped with weight sensors located in the base of the unit that are used to further detect and weigh the cat within the globe while in the Home position. If your unit has a blue light bar with partial yellow flashing or the unit will not cycle, this indicates that the scale has been triggered for more than 30 minutes.To troubleshoot the blue blinking, let's start by power cycling your unit: 1.) Leave your unit powered ON with the blue blinking light engaged & Unplug your power supply from the base. 2.) Wait 10 seconds then plug the unit back in. 3.) Allow the unit to complete a start‐up cycle.the ready (sorry not cycle) light blinks blue, when you press cycle the machine will work but sounds as if it is struggling, after a few seconds of cycling the lights will flicker (as if there is an issue with the power). If it completes the cycle it will briefly turn back to solid blue, but after 10-15 minutes will blink again.If your Litter-Robot is not detecting your cat or not cycling, complete the troubleshooting steps in our Litter-Robot 3: Cat not detected guide. If your Litter-Robot is slowly flashing yellow or stuck upside down due to the cat sensor, complete the troubleshooting steps in our Litter-Robot 3: Yellow light flashing (Cat sensor) guide.Empty button = empty all the litter out of the globe so I can clean it. These two buttons are not the same. Pressing the cycle button spins the globe to the left (counterclockwise) so that the clean litter goes in the screened pocket (called a septum) and any clumps end up in the waste drawer. Pressing the empty button rotates the globe to the ...Use a downward motion that pushes away from your body] Attempt to manually cycle the unit by pressing the "cycle" button. If the unit cycles properly, move to the next step. Reset the CATS by turning the unit off then on using the power button. During the start-up cycle, push on the unit to see if the CATS activates.Preparation. If Litter-Robot 4 has a blue light bar with a yellow blinking light adjacent to the Connect button, this indicates that the unit is in Onboarding mode and waiting to be connected to the app.. You can now proceed with the onboarding process within the Whisker App to finalize connection.. When your Litter-Robot 4 has successfully completed onboarding, the blinking yellow light will ...Simultaneous Flashing. A solid blue and yellow light may flash and remain illuminated simultaneously. This indicates that your Litter-Robot has entered its 8-Hour Sleep Mode. To deactivate this, just press and hold the Cycle button and the machine will be ready once again.3. After the litter is emptied, the globe pauses with the yellow light bar on and awaits your action. You may need to sweep any remaining litter toward the waste port. 4. Press the Cycle or Reset button to return the globe to the Home position. IMPORTANT: Supervise and prevent your cat from entering during the Empty Cycle.Cycling (In use) Working normally; Without rotation DFI sensor or Motor defective; Normal use; Replacement Guide (H) Replacement Guide (K) YELLOW FLASHING (slow or fast) Cycle interrupted. Cat interrupted the cycle; Anti-pinch pins rusted / used; Bonnet terminal pins rusted / used; Base contact pins rusted / used; Wait 15s (if cat interrupted ...If the light bar on your Litter-Robot 4 has a single yellow light that moves with the rotation of the globe, this means your unit is performing a cleaning cycle or an empty cycle. No action is needed. This is a normal light bar status. Please allow the unit to continue the cycle. If you need to pause the cycle, press the Cycle button.Disconnect the bonnet. Gently flex the two front bonnet tabs outward and hold for about 20-30 seconds. Reattach the bonnet. There are four tabs total: two in the back, two on the sides. You should feel a secure snap and hear a "click" when placed back into the slot, and the bonnet should sit closer to the base.Stop scooping the old box. Place Litter-Robot near or next to the old litter box, but don’t throw the old litter box away yet. Add a scoop of the old litter to the new litter in Litter-Robot to provide a familiar scent for your cat. Gradually make the old litter box less desirable by letting waste accumulate. Cats prefer a clean place to go ...Recently my Litter Robot II stopped cycling mid-cycle. Three lights blinking once per second or just the middle yellow light is on. The gear does not move at all. Do not see any obstructions and all connections seem sound. I'm pretty sure it's a motor issue but wanted to double-check if there was any other trouble-shooting I can check in ...Reattach the bonnet. There are four tabs total: two curved tabs in the back, two on the sides. The two curved tabs in back tuck into slots in the base. If they are sticking out, the unit will not cycle properly. You should feel a secure snap and hear a solid "click" when placed back into the slot and the bonnet should sit closer to the base. The Litter-Robot does not require special litter or proprietary consumables like several other self-cleaning litter boxes on the market. In fact, the Litter-Robot works well with almost any clumping litter. Litter beads and crystals that are small enough to pass through the screen will also work in the Litter-Robot. LR3 not cycling . I've had this LR3 for 18 months but it permanently has a blue flashing light and completely stopped cycling (it doesn't cycle manually either) ... All 3 of my robot-robot-3 are doing this (about 1 years old for all 3) really pissing me off… the only one that is working is my litter-robot-4 and I got it 2 weeks ago Reply ...No cat sensor faults and no offline errors for the past 2 days. Update: I chatted with Whisker support this morning and learned a few things. After 3 Cat Sensor faults, the Litter Robot 4 has a safety feature where it will no longer cycle. To bypass this, you need to press the Reset button in person..

Popular Topics